Wednesday, July 6, 2011

New Deck, Sealing Questions - Painting - DIY Chatroom - DIY Home ...

Old Today, 01:21 PM ? #1

Newbie

?

Join Date: Jul 2011

Posts: 5


Hello,

I just installed a new deck, (actually they are overlayed on top of two balconies each 8'x24'.)

They are made of Cedar so they aren't treated or anything. What would be the best method and product for sealing this. I do not want to stain or add tone to it, i just want to seal the cedar and protect it from fading.

Also, both decks/balconies have a full roof over them with gutters, so they only get wet from the rain that is blown on to them. So basically they arent in full sun all day either.

My choices are Lowes or Sherwin Williams, so keep that in mind with product recommendations.

I appreciate any help, and I hope this is the right place for this thread.


dmg123 is offline ? Reply With Quote

Warning: The topics covered on this site include activities in which there exists the potential for serious injury or death. DIYChatroom.com DOES NOT guarantee the accuracy or completeness of any information contained on this site. Always use proper safety precaution and reference reliable outside sources before attempting any home improvement task!

Old Today, 02:11 PM ? #2

Member

?

Join Date: Dec 2010

Posts: 333


If you go with Sherwin-Williams, I like their Deckscapes line of deck sealers. Just remember that even though your deck is covered for the most part, it will be an annual or biannual maintenance issue...........decks just take such a beating.......they require lots of maintenance.

Gymschu is online now ? Reply With Quote
Old Today, 02:55 PM ? #3

Newbie

?

Join Date: Jul 2011

Posts: 5


i was looking at the deckscapes products at the sherwin williams, (they were busy so i couldnt talk to someone, i didnt have time to wait), but i was looking at this:

http://www.sherwin-williams.com/do_i...ucts/finishes/

then they had some kind of sealer in a plastic jug. (i cant find it, online)

I didnt know which to get. Is the one in the link above like a latex? Would i roll that on?

I notice some spray it on with one of those pump sprayers. I suppose you only use that for that more liquid stuff in the plastic jug? or can you do that with this stuff that comes in the pain cans?

Would that product i linked to be the best thing to get if i went to sherwin williams and what would be the best way to apply it?

how many coats, how thick....

thanks alot

dmg123 is offline ? Reply With Quote
Old Today, 03:02 PM ? #4

Newbie

?

Join Date: Jul 2011

Posts: 5


one more thing.

i have been reading online....that the clear sealers dont protect against UV, so the cedar will grey. what do i need to do or use to help keep it from greying?

Also, if i sealed this 1-2 times a year, and it still greyed a lot and i wanted to stain it later, would i have to sand it down to apply a stain?

dmg123 is offline ? Reply With Quote
Old Today, 04:45 PM ? #5

Newbie

?

Join Date: Jul 2011

Posts: 5


I wanted to add some more info:

I live in northeast texas, so its hot and dry. it rains like 2 times a year, for about 5 seconds each time, haha.

No but seriously, i thought that info might also be important.

anyways, im going to go fine pictures of greyed cedar, i dont even know what that looks like.

dmg123 is offline ? Reply With Quote
Old Today, 05:55 PM ? #6

Painting Company, NY

?

Join Date: Jul 2009

Location: NY

Posts: 687


Even though the deck is new you will still want to clean it using a deck cleaner that contains sodium percarbonate and not bleach. Use low pressure 500-800psi on a pressure washer and then apply a brightner. A good brightner will contain citric and oxlic acid. Between lowes and SW I would use SW translucent Deckscapes.

housepaintingny is online now ? Reply With Quote
Old Today, 06:00 PM ? #7

Member

?

Join Date: Dec 2010

Posts: 333


Quote:

i was looking at the deckscapes products at the sherwin williams, (they were busy so i couldnt talk to someone, i didnt have time to wait), but i was looking at this:

http://www.sherwin-williams.com/do_i...ucts/finishes/

then they had some kind of sealer in a plastic jug. (i cant find it, online)

I didnt know which to get. Is the one in the link above like a latex? Would i roll that on?

I notice some spray it on with one of those pump sprayers. I suppose you only use that for that more liquid stuff in the plastic jug? or can you do that with this stuff that comes in the pain cans?

Would that product i linked to be the best thing to get if i went to sherwin williams and what would be the best way to apply it?

how many coats, how thick....

thanks alot


DMG, that's the product. Now, I must say I live in Eastern Ohio where the weather is not quite as harsh as it is in Texas. Deckscapes is tricky to use because you really only apply one coat. If you try to put on another coat after it dries, it repels itself and just lays on the surface.

As for keeping the cedar from graying, well, I also have used CWF-UV with cedar tone to prevent that sort of thing. It too is a waterbourne type finish that you apply and as it begins to soak into the wood, you apply another "wet-on-wet" coat so it penetrates better. It is made by the Flood Co. and can be found at most paint/big box stores.

There are, of course, many other type of deck sealing products. Many are very expensive such as Sikkens. Personally, with your weather conditions, I would favor the CWF-UV over the SW Deckscapes.

Gymschu is online now ? Reply With Quote
Old Today, 07:21 PM ? #8

Newbie

?

Join Date: Jul 2011

Posts: 5


Quote:

DMG, that's the product. Now, I must say I live in Eastern Ohio where the weather is not quite as harsh as it is in Texas. Deckscapes is tricky to use because you really only apply one coat. If you try to put on another coat after it dries, it repels itself and just lays on the surface.

As for keeping the cedar from graying, well, I also have used CWF-UV with cedar tone to prevent that sort of thing. It too is a waterbourne type finish that you apply and as it begins to soak into the wood, you apply another "wet-on-wet" coat so it penetrates better. It is made by the Flood Co. and can be found at most paint/big box stores.

There are, of course, many other type of deck sealing products. Many are very expensive such as Sikkens. Personally, with your weather conditions, I would favor the CWF-UV over the SW Deckscapes.


I actually used that CWF-UV with cedar tone on some pieces of cedar i did in a different outdoor project, during early spring of this year. I was dissapointed when i realized it was a latex based sealer though (i had already applied it, and only noticed it when i went to clean my paint trey and it just peeled off). now its only mid summer this year and its already looking like its peeling.

wouldnt it be better to use some oil based sealer? from my very limited experience and research on this, any water/latex based sealers are a bad idea due to peeling.

correct me if i am wrong or you disagree, and please elaborate with explanations.

woudnt all this water based stuff eventually peel? if so, will i have to sand/spray it off every time i reapply the stuff?

will i have to spray/sand/clean with chemicals every time i reapply any thing? if i do it twice a year that seems pretty insane.

im going to get a retractable style pool cover to cover this when not in use if this is going to take this much work. haha.

and what is with the sealers in those plastic jugs and/or with the use of those sprayers to apply the sealers?

sorry, i always just jump into doing stuff with out looking to much into and i would like a little more help on this.

thanks for everything so far.

dmg123 is offline ? Reply With Quote
Old Today, 08:03 PM ? #9

Painting Company, NY

?

Join Date: Jul 2009

Location: NY

Posts: 687


Quote:

I actually used that CWF-UV with cedar tone on some pieces of cedar i did in a different outdoor project, during early spring of this year. I was dissapointed when i realized it was a latex based sealer though (i had already applied it, and only noticed it when i went to clean my paint trey and it just peeled off). now its only mid summer this year and its already looking like its peeling.

wouldnt it be better to use some oil based sealer? from my very limited experience and research on this, any water/latex based sealers are a bad idea due to peeling.

correct me if i am wrong or you disagree, and please elaborate with explanations.

woudnt all this water based stuff eventually peel? if so, will i have to sand/spray it off every time i reapply the stuff?

will i ha
ve to spray/sand/clean with chemicals every time i reapply any thing? if i do it twice a year that seems pretty insane.

im going to get a retractable style pool cover to cover this when not in use if this is going to take this much work. haha.

and what is with the sealers in those plastic jugs and/or with the use of those sprayers to apply the sealers?

sorry, i always just jump into doing stuff with out looking to much into and i would like a little more help on this.

thanks for everything so far.

Personally I would use Sikkens SRD oil base transparent, but if your choices are Lowes or SW I would use SW
housepaintingny is online now ? Reply With Quote
Old Today, 08:10 PM ? #10

Member

?

Join Date: Dec 2010

Posts: 333


The sealers used in the pump up sprayers are junk in my opinion. CWF peeling? Wow, I've never seen it peel........it fades and discolors a bit if you don't maintain it at least every 2 years, but I can honestly say I've never seen it peel. Most deck stains use the waterbourne technology.......water based clean up with the characteristics of a penetrating oil when you apply it. Most oil stains are being phased out due to high VOC's but I know some are still available. True oil stains are a pain to work with........very runny and they splatter all over everything. The waterbournes can at least be cleaned up easily with soap and water. I would think that you will have less maintenance issues with your deck that will mostly be covered. Here in the Midwest, decks take a pounding due to rain, sleet, hail, snow laying on the surface (as it melts it acts like sandpaper on a deck) & the summer sun. Like I said, you may also want to research the high end stains like Cabot or Sikkens before you choose.

Gymschu is online now ? Reply With Quote

Source: http://www.diychatroom.com/f4/new-deck-sealing-questions-109546/

usa today oxycodone cindy anthony palm beach post chantix breaking news rush limbaugh

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.